Factor Analysis
Data Base

Industry and Technology

1. K.J. Fernandes, V. Raja, A. White and C-D. Tsinopoulos "Adoption of virtual reality within construction processes: a factor analysis approach" Technovation 26, 1, 111-120 (2006)
2. Y.Q. Ni, X.T. Zhou and J.M. Ko "Experimental investigation of seismic damage identification using PCA-compressed frequency response functions and neural networks" Journal of Sound and Vibration 290, 1-2, 242-263 (2006)

1. J-T. Bernard and B. Côté "The measurement of the energy intensity of manufacturing industries: a principal components analysis" Energy Policy 33, 2, 221-233 (2005)
2. P. Ciosek, Z. Brzózka, W. Wróblewski, E. Martinelli, C. Di Natale and A. D'Amico "Direct and two-stage data analysis procedures based on PCA, PLS-DA and ANN for ISE-based electronic tongue-Effect of supervised feature extraction" Talanta 67, 3, 590-596 (2005)
3. C-P. Fung and P-C. Kang "Multi-response optimization in friction properties of PBT composites using Taguchi method and principle component analysis" Journal of Materials Processing Technology 170, 3, 602-610 (2005)
4. M. O'Farrell, E. Lewis, C. Flanagan, W.B. Lyons and N. Jackman "Combining principal component analysis with an artificial neural network to perform online quality assessment of food as it cooks in a large-scale industrial oven" Sensors and Actuators B: Chemical 107, 1, 104-112 (2005)
5. D.S. Lee, J.M. Park and Peter A. Vanrolleghem "Adaptive multiscale principal component analysis for on-line monitoring of a sequencing batch reactor" Journal of Biotechnology 116, 2, 195-210 (2005)
6. N. Lu, Y. Yao, F. Gao and F Wang "Two-dimensional dynamic PCA for batch process monitoring" AIChE Journal 51, 12, 3300-3304 (2005)
7. J. Ramachandran and M.A. Aschheim "Sample size and error in the determination of mode shapes by principal components analysis" Engineering Structures 27, 14, 1951-1967 (2005)
8. C. Servière and P. Fabry "Principal component analysis and blind source separation of modulated sources for electro-mechanical systems diagnostic" Mechanical Systems and Signal Processing 19, 6, 1293-1311 (2005)
9. X. Sun, H.J. Marquez, T. Chen, and M. Riaz "An improved PCA method with application to boiler leak detection" ISA Transactions 44, 3, 379-397 (2005)
10. S. Wang, and J. Cui "Sensor-fault detection, diagnosis and estimation for centrifugal chiller systems using principal-component analysis method" Applied Energy 82, 3, 197-213 (2005)
11. A-M. Yan, G. Kerschen, P. De Boe and J-C. Golinval "Structural damage diagnosis under varying environmental conditions-part II: local PCA for non-linear cases" Mechanical Systems and Signal Processing 19, 4, 865-880 (2005)

1. R. Chattopadhyay, A. Guha and Jayadeva "Performance of neural networks for predicting yarn properties using principal component analysis" Journal of Applied Polymer Science 91, 3, 1746-1751 (2004)
2. S.W. Choi, J.H. Park and I-B. Lee "Process monitoring using a Gaussian mixture model via principal component analysis and discriminant analysis" Computers & Chemical Engineering 28, 8, 1377-1387 (2004)
3. Y. Enomoto, M. Kitamura, T. Sakai, and K. Ohara "Factor Analysis on Cogging Torques in Segment Core Motors" Transactions of the Institute of Electrical Engineers of Japan, Part D 124, 1, 85-90 (2004)
4. D.P. Fang, F. Xie, X.Y. Huang and H. Li "Factor analysis-based studies on construction workplace safety management in China" International Journal of Project Management 22, 1, 43-49 (2004)
5. S.G. Kulkarni, A.K. Chaudhary, S. Nandi, S.S. Tambe and B.D. Kulkarni "Modeling and monitoring of batch processes using principal component analysis (PCA) assisted generalized regression neural networks (GRNN)" Biochemical Engineering Journal 18, 3, 193-210 (2004)
6. J-M. Lee, C.K. Yoo, S.W. Choi, P.A. Vanrolleghem and I-B. Lee "Nonlinear process monitoring using kernel principal component analysis" Chemical Engineering Science 59, 1, 223-234 (2004)
7. J-M. Lee, C.K. Yoo, and I-B. Lee "Fault detection of batch processes using multiway kernel principal component analysis" Computers and Chemical Engineering 28, 9, 1837-1847 (2004)
8. F. Liu and Z. Zhao "Chemical Separation Process Monitoring Based on Nonlinear Principal Component Analysis" In: "Advances in Neural Networks - ISNN 2004": International Symposium on Neural Networks, Dalian, China, August 2004, Proceedings, Part I, Eds.: F. Yin, J. Wang, and C. Guo. Lecture Notes in Computer Science 3173, 1, 798-803 (2004)
9. H. Morais, C. Ramos, E. Forgacs, A. Jakab and T. Cserhati "Enzyme Production of Pleurotus ostreatus Evaluated by the Three-Way Principal Component Analysis" Engineering in Life Sciences 4, 2, 165-170 (2004)
10. Y. Pérez, F.E. Wubbolts, G.J. Witkamp, P.J. Jansens, and Th.W. de Loos "Improved PCA process for the production of nano- and microparticles of polymers" AIChE Journal 50, 10, 2408-2417 (2004)
11. L. Pommer, J. Fick, J. Sundell, C. Nilsson, M. Sjostrom, B. Stenberg, and B. Andersson "Class separation of buildings with high and low prevalence of SBS by principal component analysis" Indoor Air 14, 1, 16-23 (2004)
12. I. Vandendael, O. Steenhaut, A. Hubin, J. Vereecken, P. Prince, F. Reniers and T. Segato "AES analysis of nitride layers on steel with target factor analysis" Surface and Interface Analysis 36, 8, 1093-1097 (2004)
13. S. Wang and Y. Chen "Sensor validation and reconstruction for building central chilling systems based on principal component analysis" Energy Conversion and Management 45, 5, 673-695 (2004)
14. S. Wang and F. Xiao "AHU sensor fault diagnosis using principal component analysis method" Energy and Buildings 36, 2, 147-160 (2004)
15. S. Yoon and J.F. MacGregor "Principal-component analysis of multiscale data for process monitoring and fault diagnosis" AIChE Journal 50, 11, 2891-2903 (2004)
16. S. Zhou, J. Zhang and S. Wang "Fault diagnosis in industrial processes using principal component analysis and hidden markov model" IEEE Proceedings on American Control Conference, 2004 6, 5680-5685 (2004)

1. M.A. Aschheim, E.F. Black and I. Cuesta "Theory of principal components analysis and applications to multistory frame buildings responding to seismic excitation" Engineering Structures 24, 8, 1091-1103 (2002)
2. D.S. Lee and P.A. Vanrolleghem "Monitoring of a sequencing batch reactor using adaptive multiblock principal component analysis" Biotechnology and Bioengineering 82, 4, 489-497 (2003)
3. E. Marengo, M.C. Gennaro, V. Gianotti, and E. Robotti "Monitoring of an industrial process by multivariate control charts based on principal component analysis" Annali di Chimica 93, 5-6, 525-538 (2003)
4. P. Ravazzani, G. Tognola, M. Parazzini, and F. Grandori "Principal component analysis as a method to facilitate fast detection of transient-evoked otoacoustic emissions" IEEE Transactions on Biomedical Engineering 50, 2, 249-252 (2003)
5. A.M. Sánchez and M.P. Pérez "Flexibility in new product development: a survey of practices and its relationship with the product's technological complexity" Technovation 23, 2, 139-145 (2003)
6. A. Sophian, G.Y. Tian, D. Taylor and J. Rudlin "A feature extraction technique based on principal component analysis for pulsed Eddy current NDT" NDT & E International 36, 1, 37-41 (2003)
7. E. Vázquez-Martinez "A travelling wave distance protection using principal component analysis" International Journal of Electrical Power & Energy Systems 25, 6, 471-479 (2003)

1. J.O. Alimba and C.J.C. Akubuilo "Assessing the consequences of technological change on farm enterprises in southeastern Nigeria by use of factor analysis" Agricultural Systems 74, 2, 257-270 (2002)
2. J. Chen and K-C. Liu "On-line batch process monitoring using dynamic PCA and dynamic PLS models" Chemical Engineering Science 57, 1, 63-75 (2002)
3. J. Gilmour and L. Wang "Detection of process abnormality in food extruder using principle component analysis" Chemical Engineering Science 57, 7, 1091-1098 (2002)
4. S.P. Heo and W.H. Yang "Stress intensity factor analysis of elliptical corner cracks in mechanical joints by weight function method" International Journal of Fracture 115, 4, 377-399 (2002)
5. Z. Hua and Z. Lizi "The factor analysis of short-term load forecast based on wavelet transform" IEEE Proceedings on Power System Technology, PowerCon 2002 - International Conference 2, 1073-1076 (2002)
6. M. Johnson "Waveform based clustering and classification of AE transients in composite laminates using principal component analysis" NDT & E International 35, 6, 367-376 (2002)
7. D.A. Karras and B.G. Mertzios "Improved Defect Detection Using Novel Wavelet Feature Extraction Involving Principal Component Analysis and Neural Network Techniques" In: AI 2002: Advances in Artificial Intelligence, Eds: B. McKay, J. Slaney (Lecture Notes in Artificial Intelligence 2557), 638-647 (2002)
8. S. Lachman-Shalem, N. Haimovitch, E.N. Shauly, and D.R. Lewin "MBPCA application for fault detection in NMOS fabrication" IEEE Transactions on Semiconductor Manufacturing 15, 1, 60-70 (2002)
9. S.L. McArthur, M.S. Wagner, P.G. Hartley, K.M. McLean, H.J. Griesser and D.G. Castner "Characterization of sequentially grafted polysaccharide coatings using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and principal component analysis (PCA)" Surface and Interface Analysis 33, 12, 924-931 (2002)
10. M. Misra, H.H. Yue, S.J. Qin and C. Ling "Multivariate process monitoring and fault diagnosis by multi-scale PCA" Computers & Chemical Engineering 26, 9, 1281-1293 (2002)
11. Y. Mugikura, K. Asano "Performance of several types of fuel cells and factor analysis of performance" Electrical Engineering in Japan 138, 1, 24-33 (2002)
12. M. Sánchez-Agudo, L. Soriano, J.F. Trigo, C. Quirós, G.G. Fuentes, C. Morant, E. Elizalde and J.M. Sanz "Factor analysis applied to the study of valence band resonant photoemission spectra in transition-metal compounds" Surface and Interface Analysis 34, 1, 244-247 (2002)
13. R.K. Tomita, S.W. Park and O.A.Z. Sotomayor "Analysis of activated sludge process using multivariate statistical tools––a PCA approach" Chemical Engineering Journal 90, 3, 283-290 (2002)
14. H. Wang, Z. Song and H. Wang "Statistical process monitoring using improved PCA with optimized sensor locations" Journal of Process Control 12, 6, 735-744 (2002)

1. Th. Amand, G. Heyen and B. Kalitventzeff "Plant monitoring and fault detection - Synergy between data reconciliation and principal component analysis" Computers & Chemical Engineering 25, 4-6, 501-507 (2001)
2. K. Blind, K. Cuhls and H. Grupp "Personal attitudes in the assessment of the future of science and technology: A factor analysis approach" Technological Forecasting and Social Change 68, 2, 131-149 (2001)
3. V. Pravdova, B. Walczak, D.L. Massart, H. Robberecht, R. Van Cauwenbergh, P. Hendrix and H. Deelstra "Three-way Principal Component Analysis for the Visualization of Trace Elemental Patterns in Vegetables after Different Cooking Procedures" Journal of Food Composition and Analysis 14, 2, 207-225 (2001)
4. R. Reiche, S. Oswald and K. Wetzig "XPS and factor analysis for investigation of sputter-cleaned surfaces of metal (Re, Ir, Cr)–silicon thin films " Applied Surface Science 179, 1-4, 317-324 (2001)
5. Y.M. Sebzalli and X.Z. Wang "Knowledge discovery from process operational data using PCA and fuzzy clustering" Engineering Applications of Artificial Intelligence 14, 5, 607-616 (2001)
6. P.M. Wong and S.A.R. Shibli "Modelling a fluvial reservoir with multipoint statistics and principal components" Journal of Petroleum Science and Engineering 31, 2-4, 157-163 (2001)

1. M.D. Alvarez and W. Canet "Principal component analysis to study the effect of temperature fluctuations during storage of frozen potato" European Food Research and Technology 211, 6, 415-421 (2000)
2. J. Antony "Multi-response optimization in industrial experiments using Taguchi's quality loss function and principal component analysis" Quality and Reliability Engineering International 16, 1, 3-8 (2000)
3. N. De Belie, V. De Smedt and J. De Baerdemaeker "Principal component analysis of chewing sounds to detect differences in apple crispness" Postharvest Biology and Technology 18, 2, 109-119 (2000)
4. G. Destefanis, M.T. Barge, A. Brugiapaglia and S. Tassone "The use of principal component analysis (PCA) to characterize beef" Meat Science 56, 3, 255-259 (2000)
5. E. Gutiérrez and J.M. Zaldivar "The application of Karhunen-Loéve, or principal component analysis method, to study the non-linear seismic response of structures" Earthquake Engineering & Structural Dynamics 29, 9, 1261-1286 (2000)
6. G. Heo, S.S. Choi and S.H. Chang "Thermal power estimation by fouling phenomena compensation using wavelet and principal component analysis" Nuclear Engineering and Design 199, 1-2, 31-40 (2000)
7. X. Jin, S. Wang and G. Rong "Streptomycin fermentation process modeling with principal component analysis and fuzzy model" IEEE Proceedings on Intelligent Control and Automation, 3rd World Congress 3, 2095-2098 (2000)
8. F.H. Low, L.P. Khoo, C.K. Chua and N.N. Lo "Determination of the major dimensions of femoral implants using morphometrical data and principal component analysis" Proceedings of the Institution of Mechanical Engineers, Part H 214, 3, 301-309 (2000)
9. C. Mate and R. Calderon "Exploring the characteristics of rotating electric machines with factor analysis" Journal of Applied Statistics 27, 8, 991-1006 (2000)
10. R. Nonell, S. Thió-Henestrosa and T. Aluja-Banet "Some alternatives for conditional principal component analysis" Applied Stochastic Models in Business and Industry 16, 2, 147-158 (2000)
11. S. Oswald, B. Schmidt and K-H. Heinig "XPS investigation with factor analysis for the study of Ge clustering in SiO₂" Surface and Interface Analysis 29, 4, 249-254 (2000)
12. P.R. Patnaik "Principal component analysis for minimal model identification of a noise-affected fermentation: application to streptokinase" Biotechnology Letters 22, 5, 393-397 (2000)
13. R. Pieterwas, G. Ecke, R. Kosiba and H. Rößler "A new method of the determination of significant factors with factor analysis in AES" Fresenius' Journal of Analytical Chemistry 368, 4, 326-334 (2000)
14. F.A.C. Pinto, J.F. Reid, Q. Zhang and N. Noguchi "Vehicle Guidance Parameter Determination from Crop Row Images using Principal Component Analysis" Journal of Agricultural Engineering Research 75, 3, 257-264 (2000)
15. Y. Rotem, A. Wachs and D.R. Lewin "Ethylene compressor monitoring using model-based PCA" AIChE Journal 46, 9, 1825-1836 (2000)
16. J. Vainionpää, R. Kervinen, M. de Prado, E. Laurila, M. Kari, L. Mustonen and R. Ahvenainen "Exploration of storage and process tolerance of different potato cultivars using principal component and canonical correlation analyses" Journal of Food Engineering 44, 1, 47-61 (2000)

1. G. Borzelli, A. Cappizzo and E. Papa "Inter- and intra-individual variability of ground reaction forces during sit-to-stand with principal component analysis" Medical Engineering & Physics 21, 4, 235-240 (1999)
2. A.R. Cotrim, A. Ferraz, A.R. Gonçalves, F.T. Silva and R.E. Bruns "Identifying the origin of lignins and monitoring their structural changes by means of FTIR-PCA and -SIMCA" Bioresource Technology 68, 1, 29-34 (1999)
3. T. Do and N.S. McIntyre "Application of parallel factor analysis and x-ray photoelectron spectroscopy to the initial stages in oxidation of aluminium. II. The O 1s photoelectron line" Surface and Interface Analysis 27, 12, 1037-1045 (1999)
4. T. Do, N.S. McIntyre, R.A. Harshman, M.E. Lundy and S.J. Splinter "Application of parallel factor analysis and x-ray photoelectron spectroscopy to the initial stages in oxidation of aluminium. I. The Al 2p photoelectron line" Surface and Interface Analysis 27, 7, 618-628 (1999)
5. V. Esposito and S. Balbi "A simultaneous non-symmetrical principal component analysis with a group structure" Applied Stochastic Models in Business and Industry 15, 4, 301-309 (1999)
6. M. Frau, S. Simal, A. Femenia, E. Sanjuan and C. Rossello "Use of principal component analysis to evaluate the physical properties of Mahon cheese" European Food Research and Technology 210, 1, 73-76 (1999)
7. J. Gertler, W. Li, Y. Huang, and T.J. McAvoy "Isolation enhanced principal component analysis" AIChE Journal 45, 2, 323-334 (1999)
8. I. Gilad, E.R. Tichauer and S.B. Graves "Pelvic positions during lifting, a multi factor analysis" International Journal of Industrial Ergonomics 23, 4, 319-329 (1999)
9. M.K. Hartnett, G. Lightbody and G.W. Irwin "Identification of state models using principal components analysis" Chemometrics and Intelligent Laboratory Systems 46, 2, 181-196 (1999)
10. Z. Kurtanjek "Modeling of chemical reactor dynamics by nonlinear principal components" Chemometrics and Intelligent Laboratory Systems 46, 2, 149-159 (1999)
11. S. Oswald and S. Baunack "Factor analysis and XPS-data preprocessing for non-conducting samples" Fresenius' Journal of Analytical Chemistry 365, 1-3, 59-62 (1999)
12. M.E. Pate, M.K. Turner, N.F. Thornhill and N.J. Titchener-Hooker "The use of principal component analysis for the modelling of high performance liquid chromatography" Bioprocess Engineering 21, 3, 261-272 (1999)
13. P.E. Shaw, M.G. Moshonas, B.S. Buslig, S.M. Barros and W.W. Widmer "Discriminant and principal component analyses to classify commercial orange juices based on relative amounts of volatile juice constituents" Journal of the Science of Food and Agriculture 79, 13, 1949-1953 (1999)
14. H. Vedam and V. Venkatasubramanian "PCA-SDG based process monitoring and fault diagnosis" Control Engineering Practice 7, 7, 903-917 (1999)
15. A. Wachs and D.R. Lewin "Improved PCA methods for process disturbance and failure identification" AIChE Journal 45, 8, 1688-1700 (1999)
16. B.M. Wise, N.B. Gallagher, S.W. Butler, D.D. White Jr and G.G. Barna "A comparison of principal component analysis, multiway principal component analysis, trilinear decomposition and parallel factor analysis for fault detection in a semiconductor etch process" Journal of Chemometrics 13, 3-4, 379-396 (1999)

1. Y. Arkun and F. Kayihan "A novel approach to full CD profile control of sheet-forming processes using adaptive PCA and reduced-order IMC design" Computers and Chemical Engineering 22, 7-8, 945-962 (1998)
2. B.R. Bakshi "Multiscale PCA with application to multivariate statistical process monitoring" AIChE Journal 44, 7, 1596-1610 (1998)
3. A.R. Gonçalves, E. Esposito and P. Benar "Evaluation of Panus tigrinus in the delignification of sugarcane bagasse by FTIR-PCA and pulp properties" Journal of Biotechnology 66, 2-3, 177-185 (1998)
4. Y. Horimoto and S. Nakai "Classification of pasteurized milk using principal component similarity analysis of off-flavours" Food Research International 31, 4, 279-287 (1998)
5. R. Kumar and R.K. Ray "Modeling Microstructural Heterogeneity in Materials by Using Q-Mode Factor Analysis" Materials Characterization 40, 1, 7-13 (1998)
6. Z. Kurtanjek "Principal component ANN for modelling and control of baker's yeast production" Journal of Biotechnology 65, 1, 23-35 (1998)
7. P. Lazzarin and R. Tovo "A Notch Intensity Factor Approach to the Stress Analysis of Welds" Fatigue & Fracture of Engineering Materials & Structures 21, 9, 1089-1103 (1998)
8. C-F. Mandenius, A. Hagman, F. Dunås, H. Sundgren and I. Lundström "A multisensor array for visualizing continuous state transitions in biopharmaceutical processes using principal component analysis" Biosensors and Bioelectronics 13, 2, 193-199 (1998)
9. M.E. Pate, N.F. Thornhill, R. Chandwani, M. Hoare, N.J. Titchener-Hooker "Pre-processing of chromatographic data for principal component analysis" Bioprocess Engineering 19, 4, 297-305 (1998)

1. R.M. Chandwani, M.E. Pate, J. Savery, N.F. Thornhill, B. Horstmann, M. Hoare and N.J. Titchener-Hooker "The use of principal component analysis as a database mining tool for the exploratory diagnosis of chromatographic processes" Bioprocess Engineering 17, 4, 229-234 (1997)
2. M. Frau, S. Simal, A. Femenia and C. Rossello "Application of principal component analysis to chemical characteristics of Mahon cheese" Zeitschrift für Lebensmitteluntersuchung und -forschung A 205, 6, 429-432 (1997)
3. A. John, H.-J. Scheibe, H. Ziegele and S. Oswald "Characterization of Laser-Arc deposited multilayer systems by means of AES, Factor Analysis and XPS" Fresenius' Journal of Analytical Chemistry 358, 1/2, 304-307 (1997)
4. K. Molt and R. Schramm "Application of factor analysis in EDXRF" Fresenius' Journal of Analytical Chemistry 359, 1, 61-66 (1997)
5. S. Oswald and S. Baunack "Application of XPS and factor analysis for non-conducting materials" Surface and Interface Analysis 25, 12, 942-947 (1997)
6. H. Tong and C.M. Crowe "Detecting persistent gross errors by sequential analysis of principal components" AIChE Journal 43, 5, 1242-1249 (1997)

1. J. Chen, J.A. Bandoni, and J.A. Romagnoli "Robust PCA and normal region in multivariate statistical process monitoring" AIChE Journal 42, 12, 3563-3566 (1996)
2. D. Dong and T.J. McAvoy "Batch tracking via nonlinear principal component analysis" AIChE Journal 42, 8, 2199-2208 (1996)
3. R. Dunia, S.J. Qin, T.F. Edgar, and T.J. McAvoy "Identification of faulty sensors using principal component analysis" AIChE Journal 42, 10, 2797-2812 (1996)
4. C.M. Mastrangelo, G.C. Runger and D.C. Montgomery "Statistical process monitoring with principal components" Quality and Reliability Engineering International 12, 3, 203-210 (1996)
5. K. Yang "Improving automotive dimensional quality by using principal component analysis" Quality and Reliability Engineering International 12, 6, 401-409 (1996)

1. L. Dobrzanski "The linear statistical d.c. model of GaAs mesfet using factor analysis" Solid-State Electronics 38, 2, 487-495 (1995)
2. H. Tong and C.M. Crowe "Detection of gross erros in data reconciliation by principal component analysis" AIChE Journal 41, 7, 1712-1722 (1995)

1. A. Itagaki, M. Takashima, Y. Ashino, C. Nishio and S. Nakanishi "Fuzzy inference systems by genetic algorithm and factor analysis modeling for multivariate complex systems" IEEE Proceedings on Emerging Technologies and Factory Automation, ETFA '94 - Symposium, 199-205 (1994)
2. D. Krishna and P.J. Reddy "A comprehensive coal index by factor analysis for ranking Indian coals" Chemometrics and Intelligent Laboratory Systems 22, 2, 273-278 (1994)
3. P. Nomikos and J.F. MacGregor "Monitoring batch processes using multiway principal component analysis" AIChE Journal 40, 8, 1361-1375 (1994)
4. S. Tesch and M. Otto "Application of principal-component analysis to the interpretation of brown coal properties" Fuel 74, 7, 978-982 (1994)

1. C. Jansson, G.T. Nielsen, J. Jakobsen and P. Morgen "Wear resistant sulfur films on hard ball bearing steel studied by Auger electron spectroscopy and sputter profiling, including factor analysis" Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 11, 1, 183-194 (1993)

1. C. Gatts and W. Losch "Application of factor analysis to Auger crater-edge profiling" Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 9, 6, 2982-2985 (1991)
2. J.A. Power, D. Barry, A. Mathewson and W.A. Lane "Worst-case simulation using principal component analysis techniques: An investigation" Microelectronic Engineering 15, 1-4, 213-216 (1991)

1. D.O. Hancock and R.E. Synovec "Early detection of C-130 aircraft engine malfunction by principal component analysis of the wear metals in C-130 engine oil" Applied Spectroscopy 43, 2, 202-208 (1989)

1. G. Bánvölgyi, P. Valkó, S. Vajda and N. Fülö "Estimation of influential parameters in a steady-state evaporator model: The principal component approach" Computers & Chemical Engineering 12, 2-3, 117-122 (1988)

1. V.H. Nguyen and L. Toro "A Factorial technique for selecting dimension of Hougen-Watson models" Chemical Engineering Science 32, 11, 1345-1348 (1977)

1. A.W. Blackman Jr., E.J. Seligman and G.C. Sogliero "An innovation index based on factor analysis" Technological Forecasting and Social Change 4, 3, 301-316 (1973)

1. R. Harper, A.J. Kent and G.W. Scott Blair "The Application of Multiple Factor Analysis to Industrial Test Data" British Journal of Applied Physics 1, 1, 23-28 (1950)
2. A.J. Kent "Note on the Interpretation of Multiple Factor Analysis" British Journal of Applied Physics 1, 1, 28-29 (1950)